|
2.5" EXTERNAL
IDE
HD ENCLOSURE -
(UPS Charger for HD and MP3
player)
Model : ITM-UPS25U
The 2.5" HDD enclosure is designed to
perform a seamless protocol transfer between the USB and
ATA interface and build in a
2300mA Lithium battery
to support extra power requirement,
It will support all
kinds of 2.5" HD without any adapter
and work with full function at full speed or high speed
USB transfer mode. Besides this,
it also provide a DC output to charge your MP3/MP4
Player by a DC to mini USB cable.
�@
Features:
Universal Serial Bus Specification 2.0 Compliant
USB Mass Storage Class Bulk-Only Transport
Specification Compliant
AT Attachment with Packet Interface Extension
(ATA/ATAPI-6) Compliant
ATA interface support PIO mode 0~4, Multiword DMA
mode 0~2, and Ultra-DMA mode 0~4 to work with ATA/ATAPI
devices
Integrated the full speed and Hi-speed Bench MARK
transfer rate.
Sufficient 4K bytes data buffer for both the
downstream and upstream data transfer in optimized
performance
Build in power Battery pack for 3.5 ��5
hours operation stand alone. And easy USB charger
function build in.
Recharging by USB port while the Mode switch at
OFF position. USB work at the full charging status.
Fashionable design for outlook with Aluminum and
made for effective heat dispersion.
The DC output will provide 5V/2A power, you could charge
the mp3/mp4 player by mini USB cable.
Specification:
|
IDE
 |
|
HD type |
2.5�� HD |
|
PIO mode |
PIO mode 0~4,
Multiword DMA mode 0~2, and Ultra-DMA mode
0~4 to work with ATA/ATAPI devices |
|
USB |
|
Interface |
USB2.0 / 1.1
|
|
Voltage |
3.7V |
|
Capacity |
2350~2400mah |
|
�@ |
Temperature |
Humidity |
|
Charge |
0 ~ 50
�J |
20~85% RH |
|
Discharge |
-10 ~ 60
�J |
20~85% RH |
|
Storage(<1month) |
-20 ~ 60
�J |
40~85% RH |
|
DC Output |
5V / 2A, DC to
mini USB. |
|
Operating OS |
Windowns98SE(driver required)
�B
ME
�B 2000
�B
XP |
|
Material |
Aluminum |
|
Size |
143.5 * 80 *
22.5 (mm) |
|
Accessories
|
2.5�� HD
Enclosure, screw driver, screws, USB cable,
DC to mini USB cable, quick guide,
|
�@
�@
2400mah battery :
lithium - ion rechargeable battery . The USB power
shortage in the supply of work, Battery can be deployed
to provide power supply automatic. Battery work
approx.200 hours.
Charging System:
|
Switch ON and
Recharging by USB port : The Mode switch at ON
position. Battery at state-of-charge.
|
|
G/Full: Green LED
light and the battery full charged. |
|
R/Charge: Red LED
light and battery work at charging status. |
|
Switch OFF and
Recharging by USB port : The Mode switch at ON
position. USB work at the FULL charging status.
(When USB none input signal and removal hard
disk setting device driver from Windows , The
USB also work at the FULL charging status) |
|
G/Full: Green LED
light and the battery full charged. |
|
R/Charge: Red LED
light and battery work at full charging status.
 |
|
|
�@ |
|
2.5" EXTERNAL SATA
HD ENCLOSURE - (UPS Charger
for HD and MP3 player)
Model : ITM-UPS25S
Product Overview
The 2.5" SATA HDD enclosure is
designed to perform a seamless protocol transfer between
the USB2.0 and e-SATA interface and build in a
2300mA Lithium
battery to support extra
power requirement,
It will support all
kinds of 2.5" SATA HD without any adapter
and work with full function at full speed or high speed
USB transfer mode. Besides this,
it also provide a DC output to charge your MP3/MP4
Player by a DC to mini USB cable.
�@
Features:
USB 1.1 and USB 2.0 compliant and
One SATA channel support.
Data transfer rate of up to 60
MB/sec on USB side, 150 MB/sec on SATA side.
SATA specification 1.0 (1.5 Gbps),
SATA II and eSATA Compliant (Hot Plug is supported).
Supports 3Gbps SATA host and 3Gbps
SATA HDD connection to internal 1.5Gbps SATA Phy.
Build in power Battery pack for
3.5~5 hours operation stand alone. And easy USB
charger function build in.
Recharging by USB port while the
Mode switch at OFF position. USB work at the full
charging status.
Fashionable design for outlook
with Aluminum and made for effective heat
dispersion.
The DC output will provide 5V/2A
power, you could charge the mp3/mp4 player by mini
USB cable.
�@
Specification:
|
SATA
 |
|
HD type |
2.5�� SATA HD /
hiegh: 9~12mm / UP to 200GB |
|
speed |
SATA-l (1.5
Gbps), SATA-II(3 Gbps) |
|
USB |
|
Interface |
USB2.0 /
1.1(up to 60 MB/sec on USB side) |
|
Voltage |
3.7V |
|
Capacity |
2350~2400mah |
|
�@ |
Temperature |
Humidity |
|
Charge |
0 ~ 50
�J |
20~85% RH |
|
Discharge |
-10 ~ 60
�J |
20~85% RH |
|
Storage(<1month) |
-20 ~ 60
�J |
40~85% RH |
|
DC Output |
5V / 2A, DC to
mini USB. |
|
Operating OS |
Windowns98SE(driver required)
�B
ME
�B 2000
�B
XP |
|
Material |
Aluminum |
|
Size |
143.5 * 80 *
22.5 (mm) |
|
Accessories
|
2.5�� SATA HD
Enclosure, screw driver, screws, eSATA
cable, mini USB cable, DC to mini USB cable,
quick guide,
 |
|
|
